CCH Products YPO6-08C Use and Care Manual download pdf (Page 7)

Page: 7/15

1.4 Installation of the unit

1). Move the machine with the heat exhaust hose assembly installed to the window and

keep the unit at least 50cm (20‖) away from the walls or big objects as shown in Figure 7.

Figure 7

2). Snap the flat end of the heat exhaust hose end connector into the elliptical hole of the

window frame adaptor board assembly as shown in Figures 8 and 9.

Note: 1. The flat end of the exhaust hose end connector must be snapped into place.

2. To ensure proper heat exhaust, the heat exhaust hose must not have bends

greater than 45° .

Figure 8 Figure 9

Important notes:

The exhaust hose extends from 280mm - 1500mm long (11‖ – 59‖) and this length is

based on the specification of the air-conditioner model(s). Do not extend the hose or

replace with other type hoses as this may affect the functions of the air-conditioner.

The exhaust hose must be free of any obstructions to maintain a smooth and constant

heat exhaust or else the air-conditioner may overheat.

1 2 3 4 5 6 7 8 9 10 11 12 ... 15 16

No comments

CCH Products YPO6-08C Use and Care Manual Page 7